Thread: Problems with Parking Brake sticking

I am having problems with the CTLS Parking Brake sticking on. I noticed it when I first got the plane but thought it may be just new. After it sticks I have just flipped off and on a couple times and it would release. Seems to be becoming more often and harder to get to release. Has anyone else had this problem and what was needed to repair?

yes, the little brake manifold that the button slides back and forth in does not have enough travel. take the top plate off and router out a little more groove in the released position and also grind off a little of the manifold block itself to make it sit in there better. it will be evident where to grind when you remove the cover and watch the travel. the manifold is hard plastic so it files off easily. We still see our brake lever itself not popping all the way back to the full forward fully released position when you let go of the brake lever, but it doesnt bother anything unless you are pushing the plane into the hanger you will notice the slightest of drag. this has nothing to do with the locking mechanism, as you can reach in and tap the lever that last little bit forward and she will freewheel just fine.