If you have had the firewall blanket mod done make sure you re-torque the engine mount bolts through the firewall (6 of them) after a month or two. The firewall and engine bracket seems to settle in some after a while. If your voltage meter (Dynon guys) seems to be going down over time after the blanket install then check the torque on the right side where the ground wires hook up at the frame.
When someone does maint on you plane make sure they lube the flap guide rod in the baggage compartment. This is the shinny metal rod that has the small rectangle block on it that trips the limit switch for the
...
October 16, 2008 - Fuel management for the CT
On the CTsw and CTLS we use several methods to determine fuel levels for proper pre-flight planning and in-flight management.
Menu
Donatons
